HOW TO RELEASE COMPUTER LAPTOP (COMPUTER) WITH ITS IMAGES:
Here I will explain a little about how we become a technician who learn by way of Orthodox in a Laptop and (Computer) that we need to pay attention and we must know how to assemble a computer (Computer) itself this tutorial is very helpful and useful because I will explain details and equipment equipped with pictures.
In this tutorial I will give you a little science that I have to all friends and besides I get perfect knowledge about the procedure of assembling a computer (Laptop) the readers will also get the same science and will give their own satisfaction if later you managed to assemble a Computer yourself at home. Actually the activities of assembling a computer is very funny later, especially if we want to upgrade from some components of the computer components, you can see and determine for yourself how the specifications of a decent computer for yourself. For that let's just see the procedure of assembling a good computer along with the picture.
• Preparation that we need to Start Assembling Computers (Laptops)
We first prepare some components or equipment that we must provide before we start assembling computer (Laptop) such as:
• For Work Tools
1. Flower Screwdriver Size (k, s, b)
2. Screws Screw already in a Casing
3. Casing Depends on Our Interest
For Computer Components (Laptop)
Here I will explain the way Before preparing the components of the computer, we must first pay attention and adjust each component degan motherboard because not all motherboarnya types that match the component example: Intel socket processor must be adjusted with Intel socket also of course, if we install AMD automatic socket processor we can not attach to intel socket,
To Know The Type Of Socket Processor Read This Article:
The Processor Type and maderboet In Now Too Many times, but we are here to discuss 2 (Two) only:
1. AMD
2. Intel
As for what we use here is DDR3 RAM and slot on the motherboard also must support DDR3 RAM as well, socket hardisk / dvd rom using serial ATA or SATA, which is very important in selecting Pawer Suplay is WATT its election because on a power supply must match dngan the needs of a maderboth need not be less because it will result in Fatal later and will damage all the components we have installed it.
Here are some of the components we need to prepare:
a. Motherboard
b. Processor
c. Heatsink & Fan
d. RAM
e. VGA CARD (if necessary)
f. Casing
g. Power Supply
h. Hardisk
i. DVD / CDROM
j. Keyboard & mouse
k. Monitor
l. Speaker
As for a
Software
1. Operating System CD like windows 7, windows 8 or other.
2. Motherboard driver CD (VGA, Sound card, LAN, etc).
3. Application program.
Steps How To Assemble Computer (Laptop)
1. How to Install Processor to Motherboard
First of all we have to open the processor socket lock lever by pulling the lever to the side and then lift up on the motherboard that we have prepared earlier.
Before putting the processor into the socket, we should consider the dot / triangle that is on a processor corner and then we have to match the first sign the same as that on a socket motherboard we have, if we install well and neatly (well) then we re-lock the procesor socket that we release it.
Then we Cover or apply a paste on a new Maderboht we buy, otherwise we have to buy it first in a Computer store in your city, and then apply the paste on the top of the processor that will be installed heatsink (Cooling Fan). The paste serves as a heat distributor from the processor to the heatsink.
Next attach Heatsink above the processor, then lock the Heatsink so it will not be removed later, we make sure it is neat and nice heatsink (Cooling Fan).
Lastly we have to plug the Heatsink fan power connector into the motherboard correctly. And make sure that the Heatsink & Procesor is installed properly.
Look at the picture below:
2. How to Install RAM to Motherboard
• View and open the lock lever contained in the Matherbord.
• Then we adjust the position of RAM with the indentation in the RAM slot contained on the motherboard.
• if it is correct then press on each end of RAM until the RAM lever lock is usually marked with "click".
• Make sure Memory RAM is installed properly & properly.
Look at the picture below
3. How to Install Power Supply Unit (PSU) On Casing
• For power supply if you buy the casing is usually already installed power supply, if not following how to install:
• Put the PSU on top of the corner or usually there is also a put under depending on the model of the casing itself.
• Adjust the screw holes on the PSU with the screw holes of the casing
• The PSU key uses an existing screw using a screwdriver (+).
• Make sure the PSU is properly installed & not shake.
Look at the picture below
4. How to Install Harddisk And CD Or DVR-RW
Place the casing in stand, plug the hard drive in the case and the lock with the bolt using a screwdriver plus.
Attach the CD or DVR-RW at the top of the front of the chassis and the key with the screw to avoid movement.
Next plug each cable on the hard drive and CD / DVD RW.
Appeal:
For cabling make sure the serial port type of Hardisk & CD / DVD RW is using ATA or SATA type. For power cable taken from PSU while for data paired from motherbord.
Look at the picture below
5. How to Install Motherboard to Casing
• View the screw holes on the case and the screw holes on the motherbord.
• Put the motherbord into the case by matching the screw holes on the motherbord and casing.
• Lock with existing screws using a screwdriver (+).
Look at the picture below
6. How to Install Computer Cables
• After all component components are installed, the next step is to assemble the computer cables, either I / O cable, hard disk cable, CD ROM cable, CPU power cable etc. we just need to pay attention to the following picture for our guide in installing cable to a Matherbord in assembling a computer.
• here we should really pay attention to this one step, because this is one of the most important in assembling a computer, if we wrongly put a wrong cable connected, then it will be fatal later
• But you do not have to worry too much, every cable is set in such a way to be different from others, so you just match it with plugs. Here are some pictures to assemble computer cables.
7. The Last Stage In How To Assemble Computers
If all the steps to assemble the computer is complete, now we cover with the casing and give the screw. Connect the cable from one power to the wall socket and never forget to connect the monitor connector to the video card port, keyboard cable connector & mouse connector to the mouse port.
8. Inspection of Results In Computer Assembling
After assembling the computer properly, now let us do the results check with the BIOS program, do the following:
Turn on the computer and monitor, look at the monitor screen and also listen to the sound from the speakers.
Well this Bios program will be able to automatically detect any hardware that we have installed on our computer assembly results earlier.
Then Do the settings for the value of hard drive capacity and boot partition a HDD.
If it is then save the result of setting and then exit from the BIOS setup, then the computer loads the operating system with a search sequence that is adjusted by setting the boot sequence in Bios.
8. Solution If There Is Problem Of Result Of Assembling Computer
Turn on the computer, if the computer and monitor are not on, you should check the power cord on the plug is not connected yet.
When the time is turned on, the monitor screen display is still black, there must be an error on the RAm and if the CPU sounds Tit tit, immediately unplug the ram and plug it back correctly placing RAM / memory on the socket.
If the card adapter is not detected, check the placement of the adapter card is fitting what not keslotnya.
If the LED from the hard drive or CD is on, check that the connector cable is properly aligned or not.
this is a first step how to assemble a personal computer that you can practice that I give. If you have managed to assemble your own computer then you should visit my blog again, now if all is correct, we just install the operating system like install Repeat Window for the computer can be used perfectly.
EmoticonEmoticon